What is an MPU6050 – Pin Configuration, and Applications

It is a Micro Electro-mechanical system (MEMS), which consists of a three-axis accelerometer and three-axis gyroscope.
MPU6050 support measuring velocity, orientation, acceleration, and displacement.
It consists of a 16-bit analog to digital converter hardware, so it can captures three-dimension motion at the same time.
Magnetometers and microcontroller sensors are easily interfaced with MPU6050.
It is a digital device that is used for tracking a 6-axis motion device.

Pin Configuration

Pin-1- CLKIN- is the optional external reference clock input. This pin is connected to the ground when not in use.
Pin-2, Pin-3, Pin-4, and Pin-5 are NC pins. These Pins are not connected internally.
Pin-6, AUX_DA, is the I2C master serial data pin. This pin is used for connecting external sensors.
Pin-7, AUX_CL, is the I2C master serial clock. This pin is used for connecting external sensors.
Pin-8, VLOGIC, is the digital I/O supply voltage pin.
Pin-9, AD0, is the I2C slave address LSB pin.
Pin-10, RAGOUT, is the regulator filter capacitor connection.
Pin-11, FSYNC, is the frame synchronization digital input. This pin is connected to the ground when not used.
Pin-12, INT, is the interrupt digital output pin.
Pin-13, VDD, is the power supply voltage pin.
Pin-14, Pin-15, Pin-16, Pin-17 are NC pin. These pins are not connected internally.
Pin-18, GND, is the power supply ground.
Pin-19 and Pin-21 are the RESV pins. These pins are reserved.
Pin-20, CPOUT, is the charge pump capacitor connection.
Pin-22, is RESV, the reserved pin.
Pin-23, SCL, is the I2C serial clock.
Pin-24, SDA, is the I2C serial data pin.

The MPU6050 has been used in Blur free technology for video or still image stabilization.
It is used for security and authentication, navigation purposes.
This module is used in motion command technology for gesture shortcuts.
This is used in gesture recognition.
This module is small in size so, this is used in handsets and portable gaming equipment.
It is used in the 3D remote controller and 3D mice.
This module is used in gaming, gesture command control, panoramic photo capture, and viewing.