What is JQ6500 MP3 Player Module & Its Working

• The JQ6500 modules are simple voice sound modules that can play standard mono or stereo MP3 files, which you can control with buttons (no programming needed), or via a serial communications protocol (JQ6500 Arduino Library available). The module has two different modes to operate in; serial communication mode (connecting to a microcontroller) or AD button control mode (module can be controlled with switches).

• JQ6500 MP3 Player module is available in two models JQ6500-28p & JQ6500-16p.

Models:
JQ6500-28p:

• JQ6500-28P has onboard memory also but additionally includes a Micro SD card slot so you can simply put your MP3 files on a Micro SD, this is the best option if you have a larger number of MP3s, larger MP3 sizes or use an operating system other than Windows as you simply need a standard FAT formatted Micro SD card. If you are making a music player, this is the one you want.

JQ6500-16p:

• JQ6500-16P has an onboard 16Mbit (2 Mega Byte) Flash memory.
• Using a Windows (Chinese language but just two clicks to browse your files and select to upload – so you can manage) software which is embedded into the device and appears when you connect it to USB you can upload your MP3 files directly to the device.
• This is a good option if you just need a few small low-bitrate MP3s which won’t change often. If you are making a game with a few pew-pew sounds, perfect.
• There are two versions of the 16p, their pinout and functionality are the same, the only practical difference is that the new one (V2.1) has a Micro-USB instead of a Mini-USB connector.

Pin Configuration

Features of JQ6500 MP3 Player Module

• Support sampling rate (kHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48.
• 24-bit DAC output, dynamic range support 90dB, SNR support 85dB.
• Full support FAT16, FAT32 file system, the largest support 32G TF card, support 32G U disk, 64M bytes NOR FLASH.
• A variety of control modes, parallel port control mode, serial port mode, AD button control mode.
• Broadcast language spots, you can pause the background music is playing.
• The audio data is sorted by folder, up to 100 folders, every folder can be assigned 1000 songs.
• 30 level adjustable, 10 EQ adjustable.
• You can plug in SPI flash, connect the computer can display spi flash letter to update the content.
• Can be controlled through the microcontroller serial port to play the specified music.
• In the key mode, you can play mode selection: can be interrupted, can not be interrupted, single cycle, large cycle.
• Can be interrupted: that is, in the process of playing, pressing the button will interrupt the current state to perform the new.
• Can not be interrupted: that is, in the process of playing, pressing any button is invalid, until the end of the play to play the current effective.

Applications of JQ6500 MP3 Player Module

• Car navigation voice broadcast.
• Road transport inspection, toll station voice prompts.
• The train station, and bus station security check voice prompts.
• Power, communications, financial business hall voice prompts.
• The vehicle into the channel verification voice prompts.
• Border check channel voice prompts.
• Multi-channel voice alarm or device operation to guide voice.
• Electric sightseeing car safe driving voice notice.
• Mechanical and electrical equipment failure automatic alarm.
• 1Fire alarm.
• Automatic broadcast equipment, regular broadcast.