- The JQ6500 modules are simple voice sound modules that can play standard mono or stereo MP3 files, which you can control with buttons (no programming needed), or via a serial communications protocol (JQ6500 Arduino Library available). The module has two different modes to operate in; serial communication mode (connecting to a microcontroller) or AD button control mode (module can be controlled with switches).
- JQ6500 MP3 Player module is available in two models JQ6500-28p & JQ6500-16p.
- JQ6500-28P has onboard memory also but additionally includes a Micro SD card slot so you can simply put your MP3 files on a Micro SD, this is the best option if you have a larger number of MP3s, larger MP3 sizes or use an operating system other than Windows as you simply need a standard FAT formatted Micro SD card. If you are making a music player, this is the one you want.
- JQ6500-16P has an onboard 16Mbit (2 Mega Byte) Flash memory.
- Using a Windows (Chinese language but just two clicks to browse your files and select to upload – so you can manage) software which is embedded into the device and appears when you connect it to USB you can upload your MP3 files directly to the device.
- This is a good option if you just need a few small low-bitrate MP3s which won’t change often. If you are making a game with a few pew-pew sounds, perfect.
- There are two versions of the 16p, their pinout and functionality are the same, the only practical difference is that the new one (V2.1) has a Micro-USB instead of a Mini-USB connector.
|PIN TYPE||Pin Description|
|K1||Playback of Audio 1|
|K2||Playback of Audio 2|
|K3||Playback of Audio 3|
|K4||Playback of Audio 4|
|K5||Playback of Audio 5|
|RX||UART serial Data input|
|TX||UART serial data output|
|VCC||5V power supply|
Features of JQ6500 MP3 Player Module
- Support sampling rate (kHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48.
- 24-bit DAC output, dynamic range support 90dB, SNR support 85dB.
- Full support FAT16, FAT32 file system, the largest support 32G TF card, support 32G U disk, 64M bytes NOR FLASH.
- A variety of control modes, parallel port control mode, serial port mode, AD button control mode.
- Broadcast language spots, you can pause the background music is playing.
- The audio data is sorted by folder, up to 100 folders, every folder can be assigned 1000 songs.
- 30 level adjustable, 10 EQ adjustable.
- You can plug in SPI flash, connect the computer can display spi flash letter to update the content.
- Can be controlled through the microcontroller serial port to play the specified music.
- In the key mode, you can play mode selection: can be interrupted, can not be interrupted, single cycle, large cycle.
- Can be interrupted: that is, in the process of playing, pressing the button will interrupt the current state to perform the new.
- Can not be interrupted: that is, in the process of playing, pressing any button is invalid, until the end of the play to play the current effective.
Applications of JQ6500 MP3 Player Module
- Car navigation voice broadcast.
- Road transport inspection, toll station voice prompts.
- The train station, and bus station security check voice prompts.
- Power, communications, financial business hall voice prompts.
- The vehicle into the channel verification voice prompts.
- Border check channel voice prompts.
- Multi-channel voice alarm or device operation to guide voice.
- Electric sightseeing car safe driving voice notice.
- Mechanical and electrical equipment failure automatic alarm.
- 1Fire alarm.
- Automatic broadcast equipment, regular broadcast.